Foster 30-45

All Temati products
  • Foster
  • Temati adhesives
  • Foster Coating
  • Foster Sealant
  • Temati spray adhesive
Downloads

TDS

TDS-Foster_30-45_GB.pdf

SDS

SDS-Foster_30-45_180123V1_GB.PDF
Manufacturer
Temati

Foster Foamseal Sealant is a grey vapour barrier sealant designed for use with rigid thermal insulation including polystyrene foam. It remains flexible and tough in joints and will not shrink or crack during repeated cycles of high and low temperatures. Foamseal Sealant seals the joints of cellular glass and other insulations against the entrance of moisture.

  • Passive fire protection

    Group 15 Created with Sketch.

  • High temperature insulation

    Group 17 Created with Sketch.

  • Thermal insulation

    Group 14 Created with Sketch.

  • Acoustic insulation

    Group 16 Created with Sketch.

  • Accessories

Sector
HVAC
Properties
Technical Insulation
Glue / Cleaner
Product code Product description Finishing Volume
View variation ANAD3045 FOSTER 30-45 FOAMSEAL SEALANT 20L 20L
Extra information
  • Colour: grey
  • Minimum temperature: -73°C
  • Maximum temperature: 149°C
Installation guidelines

Apply by trowel, putty knife, power extrusion or caulking gun.
When sealing insulation joints apply Foamseal Sealant at 1/16 to 1/8 inch wet film thickness (1.6 to 3.2 mm) and press mating surfaces together firmly to squeeze out air bubbles and to obtain complete contact. When flashing, do not trowel out to feather edge but maintain a minimum of 1/8 inch wet film thickness (3.2 mm) throughout the entire area of use.
Use membrane as specified.
For best results, allow to cure 24-48 hours before top coating with solvent-based elastomeric mastics or coatings.